Wire Mesh Cable Tray

Material:

Q235B Steel (Chinese standard steel), SS304, SS316 & SS316L

Surface Finish:

Electro zinc plated – for indoor use to BS EN 12329-2000, 12microns thick.

Powder coated - for indoor use to JG/T3045-1998, between 6 and 10 microns thick

Hot Dipped Galvanized – for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick

Electrolytic Polishing – for stainless steel use

Dimensions:

Cable Tray dimensions are all internal. Available for customized.

Wire Mesh Cable Trays are constructed with a 50mm x 100mm mesh configuration.

Depth of 25mm, 50mm, 60mm, 75mm, 100mm &150mm.

Widths: 50~900mm.

Length of 2997 fit max loading capacity in 40’ft containers.

Diameters of wires are 4.0~ 6.0mm

Installation Notice:

Bends, Risers, T Junctions, Crosses and Reducers can be made from wire mesh cable tray straight sections flexibly in projects.

Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.

Wire Mesh Cable Tray systems can be safely employed in places where the temperature ranges between -40°C and +150°C without any change to their characteristics

Our Accessories:

Application:

Wire Mesh Cable Trays are mainly used for low voltage, telecommunication, and fiber optic cables supported on short spans.

Features & Advantages:

All sharp ends are cut off to protect cables. Weight loading capacity is 27% stronger than traditional cable trays and cable ladders.

Wire Mesh Cable Tray Welding Strength Tests:

Test Description: Cutting off testing segment from wire mesh cable trays. Place the testing welded

segment in hydraulic press and test.

Test Condition: 23±2°C, 50±5% RH, Hydraulic press speed: 5mm/min.

Result: Maximum broken force at least 1166N.

Hot dipping galvanized steel wave welded mesh wire cable tray system, 200*150mm

Raw material :steel ,stainless steel

Crafts: The raw material is steel wire, shaping after welding the wires, last making the surface treatment.

Surface treatment:
1)Galvanization apply to be installed indoors
2)Hot-dip galvanization, thickness between 60um and 80um
3)Stainless steel (201 202 304  304L  316 316L):Remove the black and Electro polishing
4)Spray(indoor or outdoor powder)

Item: Item is named through  Breadth*Height, (For example : 100*50,200*30), the dimension means the inside dimension. Usually Length of cable tray is 3000mm Breadth have different dimensions, bending height can be divided into 30mm, 50mm, 100mm and 150mm.

Applications:

Apply to arrange the wires of electric power and telecommunication. As an extension of traditional cable tray!

Specifications:

No	Item	Dimension			Mesh	Steel(Q235B)		Stainless steel(304L/316L)
						Dia	Finish	Dia	Finish
		L	W	H
	(w*h)	(mm)	(mm)	(mm)	(mm)	(mm)		(mm)
1	50*30	3000	110	30	100*50	Φ4	Galvanization/ Hot-dip galvanization	Φ4	Remove the black / Electro polishing
2	100*30	3000	160	30	100*50	Φ4		Φ4
3	150*30	3000	210	30	100*50	Φ4		Φ4
4	200*30	3000	260	30	100*50	Φ4		Φ4
5	250*30	3000	310	30	100*50	Φ4		Φ4
6	300*30	3000	360	30	100*50	Φ4		Φ4
7	350*30	3000	410	30	100*50	Φ4		Φ4
8	400*30	3000	460	30	100*50	Φ4		Φ4
9	50*50	3000	160	50	100*50	Φ4	Galvanization/ Hot-dip galvanization	Φ4	Remove the black / Electro polishing
10	100*50	3000	210	50	100*50	Φ4		Φ4
11	150*50	3000	260	50	100*50	Φ4		Φ4
12	200*50	3000	310	50	100*50	Φ4		Φ4
13	250*50	3000	360	50	100*50	Φ4		Φ4
14	300*50	3000	410	50	100*50	Φ5		Φ4
15	350*50	3000	460	50	100*50	Φ5		Φ4
16	400*50	3000	510	50	100*50	Φ5		Φ4
17	450*50	3000	560	50	100*50	Φ5		Φ4
18	500*50	3000	610	50	100*50	Φ5		Φ4
19	550*50	3000	660	50	100*50	Φ5		Φ4
20	600*50	3000	710	50	100*50	Φ5		Φ5
21	650*50	3000	760	50	100*50	Φ5		Φ5
22	700*50	3000	810	50	100*50	Φ5		Φ5
23	750*50	3000	860	50	100*50	Φ5		Φ5
24	800*50	3000	910	50	100*50	Φ5		Φ5
25	100*100	3000	310	100	100*50	Φ4	Galvanization/ Hot-dip galvanization	Φ4	Remove the black / Electro polishing
26	150*100	3000	360	100	100*50	Φ4		Φ4
27	200*100	3000	410	100	100*50	Φ4		Φ4
28	250*100	3000	460	100	100*50	Φ4		Φ4
29	300*100	3000	510	100	100*50	Φ5		Φ4
30	350*100	3000	560	100	100*50	Φ5		Φ4
31	400*100	3000	610	100	100*50	Φ5		Φ4
32	450*100	3000	660	100	100*50	Φ5		Φ4
33	500*100	3000	710	100	100*50	Φ5		Φ5
34	550*100	3000	760	100	100*50	Φ5		Φ5
35	600*100	3000	810	100	100*50	Φ5		Φ5
36	650*100	3000	860	100	100*50	Φ5		Φ5
37	700*100	3000	910	100	100*50	Φ5		Φ5
38	750*100	3000	960	100	100*50	Φ5		Φ5
39	800*100	3000	1010	100	100*50	Φ5		Φ5
40	150*150	3000	460	150	100*50	Φ4	Galvanization/ Hot-dip galvanization	Φ4	Remove the black / Electro polishing
41	200*150	3000	510	150	100*50	Φ5		Φ4
42	250*150	3000	560	150	100*50	Φ5		Φ4
43	300*150	3000	610	150	100*50	Φ5		Φ4
44	350*150	3000	660	150	100*50	Φ5		Φ5
45	400*150	3000	710	150	100*50	Φ5		Φ5
46	450*150	3000	760	150	100*50	Φ5		Φ5
47	500*150	3000	810	150	100*50	Φ5		Φ5
48	550*150	3000	860	150	100*50	Φ5		Φ5
49	600*150	3000	910	150	100*50	Φ5		Φ5
50	650*150	3000	960	150	100*50	Φ5		Φ5
51	700*150	3000	1010	150	100*50	Φ5		Φ5
52	750*150	3000	1060	150	100*50	Φ5		Φ5
53	800*150	3000	1110	150	100*50	Φ5		Φ5

Competitive Advantage:

1) Improving system upgrades and maintenance capabilities which left some updating space.

2) Flexible application of the integrated wire system,

3) It is fast and safe to repair the wire roads and facilities

4) Reducing expensive cost of second investment.

5) Weight is only 1/5 of the traditional ones

6) Saving 2/3 of the installation time than traditional ones

7) Wire system and producing environment is more clear and sanitation and beautiful.

8) Mesh structure helps it to distribute the heat, prolong the life of wires.

Wire Mesh Cable Trays can be divided into Vinyl coated wire mesh cable tray, welded mesh cable tray, galvanized steel, hot dipped galvanized steel and stainless steel wire mesh cable tray further, details go deep.

We can also produce

Standard Wire Mesh Cable Tray

Wire Mesh Channel Trays

Related products you may be interested in:
Perforated Cable Trays
Ladder Cable Tray
Perforated Channel Cable Tray